Order sand for delivery in Watford

What sand can we deliver to Watford?

• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Plastering sandWashed sand for render and sand-and-cement plaster.

Working out quantities for your Watford job

A 25 m² floor screed at 65 mm is 1.62 m³: about 2.6 tonnes of sharp sand at a 1:4 mix, or 4 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Delivering sand in Watford

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Watford is inside our standard mainland delivery area.

• With roughly 7h 48m of daylight in Watford around the shortest day, morning deliveries leave more working light for the job.
• If neighbours share the access, it helps to let them know a lorry is coming.
• Give us the full postcode for the drop point; deliveries around WD17 are priced to the exact address.

Things to check before you order

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Your questions answered

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.

Is there a minimum order for delivery to Watford?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Watford delivery?

Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.