Cement & Aggregates
Building & Sharp Sand for Stalybridge, delivered to site
Building sand (soft sand) is a fine sand for bricklaying mortar, while sharp sand is coarser and is used for concrete, screeds and paving beds.
We deliver sand to sites, driveways and yards across Stalybridge, from a single pallet for a small job to full loads for bigger builds.

Stalybridge delivery at a glance
- How it arrives
- Bulk bags, usually crane-lifted
- Daylight
- About 7h 28m on the shortest day
- Delivering to
- Stalybridge, Greater Manchester
- Nearby (straight line)
- Dukinfield (1 mi), Ashton-under-Lyne (2 mi), Hyde (2 mi)
- Postcode districts
- SK15, OL6, SK16, OL7
- Delivery
- Standard mainland delivery
Choosing from our sand range
- Sharp sandCoarser grit sand for screeds, concrete and laying paving.
- Soft building sandFine sand that gives smooth, workable bricklaying mortar.
- Plastering sandWashed sand for render and sand-and-cement plaster.
- Bulk bagsTypically around 850 kg; bag weights vary by supplier.
Before you order sand
Soft or sharp?
Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.
Colour of mortar
Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.
Before your Stalybridge delivery arrives
Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Stalybridge is inside our standard mainland delivery area.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- If neighbours share the access, it helps to let them know a lorry is coming.
Quantities: a worked example
A 40 m² floor screed at 65 mm is 2.6 m³: about 4.16 tonnes of sharp sand at a 1:4 mix, or 5 bulk bags at around 850 kg each, plus the cement. Try the sand calculator
Your questions answered
How much sand do I need for a screed?
Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.
What is the difference between building sand and sharp sand?
Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.
Can you deliver sand to a site with restricted access in Stalybridge?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Do you deliver sand to Stalybridge?
Yes. We deliver across Stalybridge, including SK15, OL6, SK16, OL7. Stalybridge is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Other towns near Stalybridge
- Building & Sharp Sand in Dukinfield
- Building & Sharp Sand in Ashton-under-Lyne
- Building & Sharp Sand in Hyde
- Building & Sharp Sand in Denton
- Building & Sharp Sand in Droylsden
- Building & Sharp Sand in Oldham
Add to your Stalybridge delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
