Building & Sharp Sand delivery in Pontypridd

Our sand range for Pontypridd jobs

• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Small bagsFor small jobs and tight access.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Plastering sandWashed sand for render and sand-and-cement plaster.

Getting sand onto your Pontypridd site

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Pontypridd is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• With roughly 7h 49m of daylight in Pontypridd around the shortest day, morning deliveries leave more working light for the job.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Before you order sand

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Working out quantities for your Pontypridd job

A 20 m² floor screed at 65 mm is 1.3 m³: about 2.08 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Building & Sharp Sand in Pontypridd: questions

Can you deliver sand to a site with restricted access in Pontypridd?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver sand to trades and homeowners in Pontypridd?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.