Building & Sharp Sand delivery in Pitsea

Our sand range for Pitsea jobs

• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Plastering sandWashed sand for render and sand-and-cement plaster.
• Small bagsFor small jobs and tight access.

Getting sand onto your Pitsea site

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Pitsea is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Before you order sand

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

How much will you need?

An 18 m² floor screed at 65 mm is 1.17 m³: about 1.87 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Your questions answered

Is there a minimum order for delivery to Pitsea?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much does a bulk bag of sand weigh?

Around 850 kg is typical, but bag weights vary between suppliers. We confirm the weight with your price.

How soon can sand be delivered in Pitsea?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.