Building & Sharp Sand delivered to Maldon

Building & Sharp Sand available for Maldon delivery

• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Small bagsFor small jobs and tight access.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Plastering sandWashed sand for render and sand-and-cement plaster.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.

Building & Sharp Sand: choosing well

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

How much will you need?

A 15 m² floor screed at 65 mm is 0.98 m³: about 1.56 tonnes of sharp sand at a 1:4 mix, or 2 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Planning the drop in Maldon

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Maldon is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Building & Sharp Sand in Maldon: questions

Do you deliver sand to trades and homeowners in Maldon?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can you deliver sand to a site with restricted access in Maldon?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much does a bulk bag of sand weigh?

Around 850 kg is typical, but bag weights vary between suppliers. We confirm the weight with your price.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.