Building & Sharp Sand for Irvine, delivered to site

What sand can we deliver to Irvine?

• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Plastering sandWashed sand for render and sand-and-cement plaster.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.

Quantities: a worked example

A 20 m² floor screed at 65 mm is 1.3 m³: about 2.08 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Before your Irvine delivery arrives

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Irvine is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• With roughly 7h 02m of daylight in Irvine around the shortest day, morning deliveries leave more working light for the job.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Getting the right sand

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Building & Sharp Sand in Irvine: questions

Do you deliver sand to trades and homeowners in Irvine?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much does a bulk bag of sand weigh?

Around 850 kg is typical, but bag weights vary between suppliers. We confirm the weight with your price.

Is there a minimum order for delivery to Irvine?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.