Building & Sharp Sand for Huyton, delivered to site

Building & Sharp Sand we supply in Huyton

• Plastering sandWashed sand for render and sand-and-cement plaster.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Small bagsFor small jobs and tight access.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.

Sizing your order

A 20 m² floor screed at 65 mm is 1.3 m³: about 2.08 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Before your Huyton delivery arrives

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Huyton is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Before you order sand

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Building & Sharp Sand questions

Do you deliver sand to trades and homeowners in Huyton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.

Is there a minimum order for delivery to Huyton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.