Order sand for delivery in Falkirk

Our sand range for Falkirk jobs

• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Small bagsFor small jobs and tight access.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Plastering sandWashed sand for render and sand-and-cement plaster.

Picking the right product

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Delivering sand in Falkirk

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Falkirk is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Give us the full postcode for the drop point; deliveries around FK1 are priced to the exact address.
• In summer Falkirk gets around 17h 37m of daylight, but early deliveries still beat the traffic and give the longest working day.

Working out quantities for your Falkirk job

A 20 m² floor screed at 65 mm is 1.3 m³: about 2.08 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Your questions answered

Can I add other materials to my Falkirk delivery?

Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver sand to a site with restricted access in Falkirk?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much sand per 1,000 bricks?

Roughly 1 tonne of soft building sand at a 1:4 mortar mix.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.