Order sand for delivery in Coleraine

Building & Sharp Sand we supply in Coleraine

• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Small bagsFor small jobs and tight access.
• Plastering sandWashed sand for render and sand-and-cement plaster.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.

Estimating your sand

A 40 m² floor screed at 65 mm is 2.6 m³: about 4.16 tonnes of sharp sand at a 1:4 mix, or 5 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Building & Sharp Sand: choosing well

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Delivery to Coleraine: what helps

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Ordering sand for Coleraine: FAQs

Do you deliver sand to trades and homeowners in Coleraine?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Coleraine?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.

How much sand per 1,000 bricks?

Roughly 1 tonne of soft building sand at a 1:4 mortar mix.