Building & Sharp Sand delivered across Bedfordshire

Which sand can you order in Bedfordshire?

• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Small bagsFor small jobs and tight access.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Plastering sandWashed sand for render and sand-and-cement plaster.

Building & Sharp Sand delivered in Bedfordshire towns

• Building & Sharp Sand in Luton
• Building & Sharp Sand in Bedford
• Building & Sharp Sand in Dunstable
• Building & Sharp Sand in Leighton Buzzard
• Building & Sharp Sand in Ampthill

Sizing your order

A 40 m² floor screed at 65 mm is 2.6 m³: about 4.16 tonnes of sharp sand at a 1:4 mix, or 5 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Delivery to Bedfordshire: what helps

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Our standard mainland delivery area covers Bedfordshire.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Things to check before you order

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Ordering sand for Bedfordshire: FAQs

Can you deliver sand to a site with restricted access in Bedfordshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can bulk bags go on my drive?

Yes, if the crane can reach and the drive can take the weight. Tell us about any block paving or soft ground.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.

Can I add other materials to my Bedfordshire delivery?

Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.