Building & Sharp Sand delivered to Bath

Building & Sharp Sand available for Bath delivery

• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Small bagsFor small jobs and tight access.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.

Sizing your order

A 20 m² floor screed at 65 mm is 1.3 m³: about 2.08 tonnes of sharp sand at a 1:4 mix, or 3 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Things to check before you order

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

How delivery works in Bath

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Bath is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Building & Sharp Sand questions

Can you deliver sand to a site with restricted access in Bath?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much does a bulk bag of sand weigh?

Around 850 kg is typical, but bag weights vary between suppliers. We confirm the weight with your price.

Is there a minimum order for delivery to Bath?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.