Ballast & Gravel for Uppingham, delivered to site

Ballast & Gravel we supply in Uppingham

• Bulk bags and small bagsTo suit quantity and access.
• 10 mm and 20 mm gravelClean graded gravel for concrete, drainage and paths.
• Decorative gravel and chippingsColours and sizes for paths and gardens.
• ShingleFor drainage layers and backfill.
• All-in ballast20 mm down sand and gravel mix for concrete.

Planning the drop in Uppingham

Bulk bags are usually lifted off by crane where access allows; tell us where they can sit and whether the ground is firm. Uppingham is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Getting the right ballast and gravel

Decorative areas

Lay decorative gravel over a weed membrane and a firm base so it does not sink.

Ballast or separate sand and gravel?

All-in ballast is convenient for general concrete. For more control over the mix, use separate sharp sand and gravel.

How much will you need?

A base 2.4 × 1.8 m and 100 mm deep is 0.43 m³ of concrete. At 1:5 with 5% extra that is about 0.99 tonnes of all-in ballast and 7 bags of cement. Try the concrete calculator

Ballast & Gravel questions

How soon can ballast and gravel be delivered in Uppingham?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can you deliver ballast and gravel to a site with restricted access in Uppingham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much ballast for a cubic metre of concrete?

Roughly 2 to 2.2 tonnes of all-in ballast with about 15 bags of cement at a 1:5 mix. Our concrete calculator works out your slab or footing.

How much gravel do I need for a path?

Multiply the area by the depth (often 40 to 50 mm for decorative gravel) to get cubic metres, then allow about 1.5 tonnes per cubic metre.