Ballast & Gravel for Slough, delivered to site

What ballast and gravel can we deliver to Slough?

• Decorative gravel and chippingsColours and sizes for paths and gardens.
• ShingleFor drainage layers and backfill.
• All-in ballast20 mm down sand and gravel mix for concrete.
• Bulk bags and small bagsTo suit quantity and access.
• 10 mm and 20 mm gravelClean graded gravel for concrete, drainage and paths.

Choosing ballast and gravel

Ballast or separate sand and gravel?

All-in ballast is convenient for general concrete. For more control over the mix, use separate sharp sand and gravel.

Gravel size

20 mm gravel suits concrete and drainage layers; 10 mm and pea gravel suit bedding pipes and paths.

Delivery to Slough: what helps

Bulk bags are usually lifted off by crane where access allows; tell us where they can sit and whether the ground is firm. Slough is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Working out quantities for your Slough job

A base 2.4 × 3 m and 150 mm deep is 1.08 m³ of concrete. At 1:5 with 5% extra that is about 2.47 tonnes of all-in ballast and 17 bags of cement. Try the concrete calculator

Questions about ballast and gravel delivery in Slough

Do you deliver ballast and gravel to trades and homeowners in Slough?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much gravel do I need for a path?

Multiply the area by the depth (often 40 to 50 mm for decorative gravel) to get cubic metres, then allow about 1.5 tonnes per cubic metre.

Is there a minimum order for delivery to Slough?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much ballast for a cubic metre of concrete?

Roughly 2 to 2.2 tonnes of all-in ballast with about 15 bags of cement at a 1:5 mix. Our concrete calculator works out your slab or footing.