Order ballast and gravel for delivery in Rottingdean

Ballast & Gravel we supply in Rottingdean

• 10 mm and 20 mm gravelClean graded gravel for concrete, drainage and paths.
• Decorative gravel and chippingsColours and sizes for paths and gardens.
• Pea gravelRounded small gravel for pipe bedding and soakaways.
• ShingleFor drainage layers and backfill.
• Bulk bags and small bagsTo suit quantity and access.

Sizing your order

A base 3 × 3 m and 150 mm deep is 1.35 m³ of concrete. At 1:5 with 5% extra that is about 3.09 tonnes of all-in ballast and 21 bags of cement. Try the concrete calculator

Picking the right product

Decorative areas

Lay decorative gravel over a weed membrane and a firm base so it does not sink.

Ballast or separate sand and gravel?

All-in ballast is convenient for general concrete. For more control over the mix, use separate sharp sand and gravel.

Getting ballast and gravel onto your Rottingdean site

Bulk bags are usually lifted off by crane where access allows; tell us where they can sit and whether the ground is firm. Rottingdean is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Give us the full postcode for the drop point; deliveries around BN2 are priced to the exact address.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Ballast & Gravel questions

Is there a minimum order for delivery to Rottingdean?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver ballast in bags?

Yes, bulk bags for most jobs and small bags for small quantities or tight access.

Can you deliver ballast and gravel to a site with restricted access in Rottingdean?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much gravel do I need for a path?

Multiply the area by the depth (often 40 to 50 mm for decorative gravel) to get cubic metres, then allow about 1.5 tonnes per cubic metre.