Order ballast and gravel for delivery in Cleethorpes

Our ballast and gravel range for Cleethorpes jobs

• Decorative gravel and chippingsColours and sizes for paths and gardens.
• Bulk bags and small bagsTo suit quantity and access.
• Pea gravelRounded small gravel for pipe bedding and soakaways.
• 10 mm and 20 mm gravelClean graded gravel for concrete, drainage and paths.
• ShingleFor drainage layers and backfill.

Sizing your order

A base 3 × 3 m and 100 mm deep is 0.9 m³ of concrete. At 1:5 with 5% extra that is about 2.06 tonnes of all-in ballast and 14 bags of cement. Try the concrete calculator

Delivering ballast and gravel in Cleethorpes

Bulk bags are usually lifted off by crane where access allows; tell us where they can sit and whether the ground is firm. Cleethorpes is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Before you order ballast and gravel

Ballast or separate sand and gravel?

All-in ballast is convenient for general concrete. For more control over the mix, use separate sharp sand and gravel.

Decorative areas

Lay decorative gravel over a weed membrane and a firm base so it does not sink.

Ballast & Gravel questions

Do you deliver ballast and gravel to trades and homeowners in Cleethorpes?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How soon can ballast and gravel be delivered in Cleethorpes?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How much ballast for a cubic metre of concrete?

Roughly 2 to 2.2 tonnes of all-in ballast with about 15 bags of cement at a 1:5 mix. Our concrete calculator works out your slab or footing.

How much gravel do I need for a path?

Multiply the area by the depth (often 40 to 50 mm for decorative gravel) to get cubic metres, then allow about 1.5 tonnes per cubic metre.